1. When making the cubicle for the female set we already had flats we could use so this cut down on the cost of wood and time. I only there for needed to make a door. I did this by using the same wooden sheeting as the flats and made a frame for support. I used but joints at each corner with 2 by 1 battons. I did not put on the bottom so it could open and close efficiantly.
2. I then used blue paint that we already had along with the cheepest spray paint I could find to do graffiti.
Spray Paint ^^^^
< Blue Paint 
I then realised that I should attach a handle to the door for ease of the actors usage. I found a handle from the props cupboard. I did this by countersinking two holes and using wood screws.
^^^ An example of the graffiti
^^^^^^^^^^
I attached the door using hinges I got from the PA technician.
No comments:
Post a Comment